- Description
- Inquiry
SSMB connector is an alternative to larger connectors like SMA RF connector. SSMB connector is designed to have snap-on mating. Besides, SSMB connector series are available for RF cables type and PCB type. SSMB connector commonly is used for 0~3GHz.
ANNXIN Technology manufactures various SSMB connectors and custom SSMB RF cable assemblies in Dongguan near SZ in China. We can provide good quality SSMB connector in short time and welcome OEM or customized RF connector. Contact us by email or call us 86-13712235188 to start business!
Information
SSMB connector are a minimized version of the standard SMB connector with snap-on mating design. This latching design allows easy installation and permits rapid connection and disconnection in small space especially in inaccessible working environment.
SSMB connector have 50 ohm impedance. These SSMB connectors are mainly used in miniaturized high frequency coaxial modules in subminiature devices at frequency up to 3 GHz and for internal equipment cable connections.
Product Range
- Cable Connectors (straight and right angle) for flexible, semi-flex and semi-rigid cables
- PCB connectors (straight and right angle)
- Adaptors
Application
- Cable Assembly
- Instrumentation
- PC/LAN
- Components
- Mil//Aero
- Telecommunication
Specification
SSMB Connector Technical Characteristics
| Electrical | |
| Impedance | 50 ohm |
| Frequency range | 0 ~ 3 GHz for 50 ohm |
| VSWR | Straight type ≤ 1.3 max. |
| R/A type ≤ 1.5 max. | |
| Dielectric withstanding voltage | 500 V rms min. |
| Working voltage | 250 V rms max. |
| Center contact resistance | ≤ 5.0 mΩ (Milliohms max.) |
| Outer contact resistance | ≤ 2.5 mΩ (Milliohms max.) |
| Insulation resistance | ≥ 103 MΩ (Megohms min.) |
| Mechanical | |
| Coupling | Snap-on |
| Contact Retention | 2 lbs min. |
| Mating Durability | 500 cycles min. (For Beryllium copper contact only) |
| Environmental | |
| Temperature Range | Teflon −65ºC ~ +155 ºC |
| Vibration | MIL-STD-202 Meth. 204 |
| Corrosion resistance | MIL-STD-202 Meth. 101 |
| Materials | |
| Body | Brass |
| Insulator | Teflon |
| Center contact | Brass for male, |
| Beryllium copper or Phosphor bronze for female | |
| Crimping sleeve | Annealed Brass |
| Body plating | Goldl (Au) |
| Center contact plating | Gold (Au) |
Note: These characteristics are typical and may not apply to all connectors.
